河北十一选五前三值走势图百度乐彩
產品
CAY型磁力驅動離心油泵
編輯:磁力泵 更新于:2014-7-30 13:57:42 閱讀:


  CAY磁力驅動離心油泵
  CAY Magnetic Driven Centrifugal Oil Pump

  CAY型磁力驅動離心油泵,旨在輸送不含固體顆粒的石油、液化氣等要求無泄漏或不允許密封污染的介質,特別是輸送高溫、高壓、易燃、易爆或有毒的液體。適合于石油精制、石油化工和化學工業等工業系統中。 
    CAY magnetic driven centrifugal oil pump is designed to convey media such as petroleum solid particle free and LPG requiring freedom of leakage or no contamination by sealing, especially high temperature, high   pressure, inflammable and explosive or toxic liquid. It is suitable for service in petroleum refining, petrochemical and chemical industrial systems.

  CAY型泵是在AY型油泵基礎上改造設計的無泄漏全密封磁力泵,其結構形式、安裝尺寸和性能參數范圍與AY油泵相同。
  CAY pump is a leakage free and fully enclosed magnetic pump renovated and designed on the basis of Model AY oil pump, and its structural form, installation dimensions and performance parameter ranges are identical to    those of AY oil pumps. 



  性能范圍         The main specifications
  流量  Capacity      2.5~500m3/h
  揚程  Head          38~240m
  溫度  Temperature   -45℃~+450℃
  進口直徑                 40~250mm
  最大工作壓力 The max working pressure 4MPa

  結構說明Description of structure

  1.CAY型泵為單級/兩級單吸懸臂式離心油泵,磁力驅動全密封,無泄漏。
  1.CAY pump is single/two-stage single suction cantilever centrifugal oil pump, driven by magnetic force, fully enclosed and free of leakage.

  2.殼體徑向剖分,泵安裝的支撐面在軸心線的水平面上,泵的進出口均垂直向上。
  2. The casing is split radially; the pump mounting support surface is on the horizontal plane of the axial line, and both inlet and outlet of the pump face vertically upwards.

  3.泵的軸向力由葉輪上的平衡孔或葉輪對稱布置達到平衡,殘余軸向力由推力軸承來承受。
  3.The axial force of the pump is balanced by the balance holes on the impellor or symmetric arrangement of impellor, and the residual thrust is taken by the thrust bearing.

  4.內置滑動軸承的潤滑方式為工藝液體自潤滑。
  4.The built-in sliding bearings are self-lubricated by process liquid.

  5.外部軸承體外表面鑄成有散熱片,輸送介質溫度小于120℃時,可采用空氣冷卻,溫度在120~260℃之間,可選用風扇冷卻,溫度大于260℃時應采用水冷卻。
  5.The outer surface of external bearings is cast with radiating fins, and it can be cooled by air when the temperature of conveying liquid is below 120℃, by fan when the temperature is between 120~260℃, and should be  cooled with water when the temperature is over 260℃.

  6.采用膜片式加長聯軸器部件,以便于檢修。
  6.Diaphragm extended coupling is used to facilitate maintenance.

  7.從原動機端看,泵為逆時針方向旋轉。
  7.The pump rotates in anti-clockwise direction when viewed from the primer side.

  泵常用材料Common pump materials 




 

Copyrights ©  版權所有:蘭州海蘭德泵業有限公司 隴ICP備10002898號 設計制作 宏點網絡
河北十一选五前三值走势图百度乐彩
河北十一选五前三值走势图百度乐彩
全天极速时时计划软件 飞艇计划6码三期 马会原创无错36码 幸运飞艇独胆论坛 黑彩网计划软件 幸运飞艇计划免费网页版 5分快3有没有技巧 重庆时时彩开奖直播 我玩龙虎输了100万 三公扑克牌作弊 抢庄斗牛看牌 酒吧5个骰子玩法及讲解 下载牛牛游戏 下载吉祥棋牌真人斗地主 乐翻二人麻将手机版 赛车北京pk10技巧